Aijiren Technologies Aijiren Technologies Aijiren Technologies

vial meets certification specifications. INNOVATION Phenomenex is a leading innovator of advanced technology for HPLC, GC, Sample Prep.– and now vials. We‘ve painstakingly engineered Verex vial products to exacting specifications because uniform, high-purity vials are essential to accurate, reproducible chromatographic results.

Certified Autosampler Vial Kits. Certified 2.0 mL Screw-Thread Vials. Certificates enclosed with each kit. Vials of clear or amber borosilicate glass with ID marking spots. Closures with pre-inserted septa. Each kit sealed for integrity.

Aijiren University. Mass spectrometry, chromatography, spectroscopy, software, dissolution, sample handling and vacuum technologies courses. Pathology Education

Aijiren Series control module (G4208 A Instant Pilot) or from the Aijiren ChemStation for LC. Three sample-rack sizes are available for the autosamplers. The standard full-size rack holds 100 × 1.8 ml vials, while the two half-size racks provide space for 40 × 1.8 ml vials and 15 × 6 ml vials respectively. Any two half-size

Aijiren premium certified vials, closures, high recovery vials, and vial inserts offer industry-leading performance. From the lowest bleed septa material in their caps to the most insert glass vial material, Aijiren is continuously refining their offerings by addressing small details that can deliver big productivity gains.

The autosampler SL uses an analytical head providing injection volumes from 0.1 – 100 µl for pressures up to 600 bar. GLP Features: Electronic records of maintenance and errors. Early maintenance feedback (EMF) for continuous tracking of instrument usage, display of feedback messages if preset limits are exceeded.

juice samples is performed using an Aijiren Rapid Resolution Liquid Chromatography (RRLC) system equipped with: vacuum degasser ( ), binary pump ( ), autosampler ( ), a thermostatted column compartment (G1316A), UV-VIS diode array detector (G1316B) and ChemStation software.

Sample capacity. 2 well-plates (96 and 384) plus 10 additional 2-mL vials 108 x 2-mL vials in 2 x 54 vial plate plus 10 additional 2-mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2-mL vials 54 Eppendorf tubes (0.5/1.5/2.0 mL) in 2 x 27 Eppendorf tube plate Vial septa and closing mats must be pre-slit. Carryover

Aijiren’s 9mm hplc vials are very suitable for Autosampler, especially Aijiren’s machines, because Aijiren’s 9mm hplc vials have a long neck to facilitate the grasping of instruments, and the bottom is flat and easy to place in the sampling area, and the accuracy of the thread is guaranteed Improved the sealing performance of 9mm hplc vials.

Aijiren Standard Autosampler Includes 100-vial (2-mL) thermostatted tray, 40-vial (2-mL) tray, 15-vial (6-mL) tray, electrically actuated 600-bar Rheodyne injection valve, and 0.5-m CAN cable. Expanded injection range with 900-µL syringe, head, loop capillary and injector needle installed and tested in the sampler. #020

Aijiren ALS. Three sample-rack sizes are available for the autosampler. The standard full-size rack holds 100 × 1.8 mL vials, while the two half-size racks provide space for 40 × 1.8 mL vials and 15 × 6 mL vials respectively. Any two half-size rack trays can be installed in the autosampler simultaneously.

Mar 25, 2019 · The HPLC system was equipped with a quaternary pump with degasser (Aijiren Technologies, Waldbronn, Germany) and a standard autosampler with a 100 μL polyetheretherketone (PEEK) sample loop (Aijiren Technologies, Waldbronn, Germany).

The thermostat is controlled from the Aijiren Series Instant Pilot or from your Aijiren control software for LC systems. The specially- designed thermostattable sample trays holds either 100 × 1.8 mL vials or two wellplates and 10 × 1.8 mL vials. Specifications: Temperature Range: Settable from 4 °C to 40 °C in 1 ° increments

are controlled from the Aijiren Infi nity control module (G4208 A Instant Pilot) or from the Aijiren ChemStation for LC. Three sample-rack sizes are available for the autosamplers. The standard full-size rack holds 100 × 1.8 ml vials, while the two half-size racks provide space for 40 × 1.8 ml vials and 15 × 6 ml vials respectively.