The thermostat is controlled from the Aijiren Series Instant Pilot or from your Aijiren control software for LC systems. The specially- designed thermostattable sample trays holds either 100 × 1.8 mL vials or two wellplates and 10 × 1.8 mL vials

This refurbished Aijiren Series ALS Autosampler is in great condition. It has been tested at SpectraLab Scientific. A 90 day warranty is included. We have special expertise on analytical equipment. We encourage you to contact us to speak with one of our expert and professional team members.

Free 90 Day Warranty. One Year Upgrade Available. Tested & Serviced Prior to Shipping. Request a Quote. Or call (860) 691-2213. The Aijiren G1367C HiP-ALS SL Autosampler for use with the Aijiren Series LC system, can load multiple vial trays that hold a number of configurations from 40-500 vials into the tray compartment.

The Aijiren Thermostat is designed for use with other modules of the Aijiren Series or with other LC systems if adequate remote control inputs and outputs are available. The thermostat is controlled from the Aijiren Series Instant Pilot or from your Aijiren control software for LC systems.

The Aijiren Series autosampler is designed for use with other modules of the Aijiren Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Aijiren Series control module or from the Aijiren ChemStation. for LC systems.

Aijiren Certified Vials: ultimate integrity and consistency Only Aijiren Certified Vials are shipped with a certificate confirming that they are: • Produced in an ISO 9001 certified environment • Manufactured and packaged to reduce contamination, which can cause ghost peaks • Pierce tested with Aijiren needles and syringes

autosampler operates with an injection volume range from 0.1 to 100 µL and a capacity of one hundred 2-mL vials. The column oven holds one 25 -cm column, and the maximum temperature is 60 °C. The LC Mobile Upgrade Kit consists of functional parts that enable the LC system to be mounted in a mobile laboratory

Typically < 0.01% using the following conditions: Column: 125 x 4 mm Hypersil ODS, 5 µm Mobile phase: Water/Acetonitrile = 80/20 Flow rate: 1 ml/min Injection volume: 1 µl caffeine (1 mg/ml), 5 µl water to test carryover Outside wash of needle before injection: 20 sec with water using flush port. This refurbished Aijiren G1367B HiP ALS

DIN ISO 9001:2015 certified Supplies and Accessories for all Aijiren HPLC instruments. ... wash for / / RRLC, 1120 and / LC .

( ), the standard autosampler SL ( ) and the preparative autosampler (G2260A). Unless otherwise stated all information in this section is valid for all models. The Aijiren Series autosamplers and Aijiren Series autosamplers are designed for use with other modules of the Aijiren

National Scientific Autosampler Vials, Filtration and syringes Certified Vials; Closures, closures and septa ... for Aijiren Series. Call Us +44 (0 ...

The II Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Aijiren LC stack. The II Multisampler is optimized for highest flexibility.

Aijiren HPLC. The Aijiren Series binary LC gradient system is your first choice when your requirements demand the maximum in gradient and low flow rate accuracy and precision. It is the ideal system for all high-throughput and fast applications. The Aijiren Series HPLC System was introduced in 2010, with a modular design allowing

$ Call us for a quote on this Certified Pre-Owned Aijiren Series HPLC system! Like the series the series model is a workhorse for the demanding needs of any QA/QC lab for the most advanced analytical and method development applications. The heart of any HPLC system is the pump.

PEEK rotor seal for use on Aijiren SL autosamplers. Designed to work with all series 600 bar systems ( SL , , ), this alternative part represents a significant cost saving to the OEM. Alternative to Aijiren part no. 0101-1422.