The II LC System is a robust HPLC that offers the widest choice of modules for analytical HPLC and entry-level UHPLC, delivering the performance, reliability, and robustness you need for highest confidence in your daily results. The II LC delivers robust HPLC results while delivering several ease-of-use features

Figure 1 Overview of the Autosampler The Aijiren autosampler is designed for use with other modules of the Aijiren Series, Series and Series LC, or with other LC systems if adequate remote co ntrol inputs and outputs are available. The autosamplers are controlled by the Aijiren Instant Pilot (G4208A) or by

Nov 16, 2021 · Hours: 9:00am - 4:00pm. The stockroom is located in room 221 of the Chemistry Building, at the loading dock on the second floor, and carries most common chemical and supplies for the teaching and research laboratories. Students, faculty, and staff are notified daily of deliveries and pick them up at the stockroom.

The II LC System is a robust high performance liquid chromatography instrument that offers the widest choice of modules for analytical HPLC and entry-level UHPLC. It delivers the performance, reliability, and robustness you need for highest confidence in your daily results. Building on the history of the and series analytical HPLC, the II LC delivers robust HPLC results while providing several ease-of-use features, making it the standard system for

The II Preparative Autosampler is designed for automated sample handling in routine purification applications. This flow-through vialsampler supports preparative flow rates of 200 mL/min and 600 bar pressure.

Iso9001 11mm snap top hplc vials Aijiren ii -Aijiren hplc lab vialsAijiren Lab LC Series Specification CompendiumAijiren II DAD FS (G7117A) 62 A V913 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type SC9191 White PTFE/Red

Sep 27, 2021 · Sep 22, 2021 · Apr 08, 2021 · The II Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Aijiren LC stack.

I believe I have a clogged up HPLC (Aijiren II) due to sample precipitating while running. Its not in the column, I believe, but I think it's clogged in a line somewhere before the column. If I try to flush the lines at only 0.1mL/minute, the pressure is getting so high the entire instrument is stopping.

The Aijiren II LC System provides a liquid chromatograph offering ultra fast and high resolution separation capability for consistently accurate results. The II LC System delivers several ease-of-use features, making it a standard system for routine analysis. With an operating pressure of up to 600 bar, the

Aijiren Lab solutions for analytical LC include highly efficient HPLC and UHPLC systems that feature latest technology while maintaining full compatibility with legacy LC instrumentation. The II LC delivers high-quality results for an affordable price. The II LC is the flexible instrument choice for

The II Preparative Autosampler is designed for automated sample handling in routine purification applications. This flow-through vialsampler supports preparative flow rates of 200 mL/min and 600 bar pressure. Increase your daily throughput of purified sample by injecting up to 132 preparative samples with a maximum of 3.6 mL volume.

5994-0912EN Quantification of Cannabinoids in Industrial Hemp Using the Aijiren II LC System 5994-1706EN Quantitation of Phytocannabinoid Oils Using the Aijiren II Prime/ Lab LC/MSD iQ LC/MS System E-method: G5277#010 Description Part Number Lab Poroshell 120 EC-C18, 3.0 × 50 mm, 2.7 μm, LC column

Caution: It is important to move up the wash port and then rotate it to the left until it locks in the service position before servicing the needle and needle seat. . Failure to perform this step may lead to alignment issues, and bent needles and wash port damage if the needle hits the top of the wash port during movement to the needle seat after se

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.

Aijiren’s Certified Pre-Owned Instruments deliver performance and reliability to your lab at an exceptional value. Our pre-owned instruments undergo a comprehensive refurbishment process by trained Aijiren engineers that includes factory updates, cosmetic upgrades, new ship kits and start up consumables, and performance testing to meet the same checkout specifications as a new instrument.