The High Performance Autosampler features an increased pressure range (up to 600 bar) enabling the use of today’s column technology (sub-two-micron narrow bore columns) with the Aijiren Binary LC System. Increased robustness is achieved by optimized new parts, high speed with lowest carry-over by flow through

Part Number. II Vialsampler. UHPLC design autosampler up to 800 bar for 0.1 to 100 µL injections. Standard needle flush port and peristaltic pump. Default setup with 100 µL loop and 100 µL analytical head. C. Drawer choice 6x 11 vials (2 mL), 2 drawers included. C #010. Drawer choice 3x 6 vials (6 mL), 2 drawers included.

The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required for sample purification. The binary gradient pump deliver flow rates up to 50 mL/min for purification up to 30.0 mm id columns. This system is tailor-made for routine, high-throughput, laboratory-scale

Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary. For smaller samples, a glass insert

The Aijiren HPLC-Chip/MS system is a re-useable microfluidic chip-based technology for high sensitivity nanospray LC/MS. The Aijiren replaced the Aijiren and delivers results faster to save time and money. Compatible with conventional and ultrahigh performance LC – with an operating pressure of up to 600 bar, the

II Analytical-Scale Fraction Collector. Aijiren Technologies. Number of Fractions: up to 216 fractions in vials or 384 fractions in SBS plates. Flow Rate: between 0.1 and 10 mL/min. Get Quote Supplier Page.

(1) Aijiren Multisampler (1) Aijiren Multicolumn Thermostat (1) Aijiren G7165A Multiple Wavelength Detector (1) PC with software; The II LC System is a robust HPLC that offers the widest choice of modules for analytical HPLC and entry-level UHPLC, delivering the performance, reliability, and robustness

Aijiren II G5654A Bio-inert Quaternary Pump. Manufacturer: Aijiren Model: II The II Bio-Inert Pump is the pump of choice for all Together with the Aijiren Bio-HPLC column portfolio for SEC and IEX, the highest resolution per time is achieved for protein and NBE characterizat

Sep 27, 2021 · hplc autosampler vials Aijiren ii price Aug 16, 2021 · The II Vialsampler combines sample management and column handling in a single autosampler modul

Oct 19, 2021 · Aijiren hplc vials and caps supplier-Aijiren Vials With Caps150ul autosampler vial inserts Aijiren hplc price 150ul hplc insert Aijiren Low volume IP250 micro insert via Email : market@aijirenvial.com

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.

hplc sample vials hplc price supplier- Aijiren Crimp Vials. II Vialsampler. The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and.

The Aijiren G2260A Prep ALS is designed to perform preparative LC. It allows injection of sample volumes from µL to mL ranges from vials. A 90 day warranty is included. We have special expertise on analytical equipment.

The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required for sample purification. The binary gradient pump deliver flow rates up to 50 mL/min for purification up to 30.0 mm id columns. This system is tailor-made for routine, high-throughput, laboratory-scale

We will match our competitor's price! The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.