The Aijiren Series High Performance Autosampler SL is designed to couple with the Aijiren Series HPLC system for HPLC analysis. The autosampler has little problem injecting protein molecules as well as organic compounds.

Product Name (all) Rinse/Waste Vials (4 mL) w/graduated marking spots and diffusion caps (2 each of 6 different colors) Clear All. 23096. 12-pk. for use with Aijiren , & and Thermo AS 1310 Autosamplers. Rinse/Waste Vials (4 mL) w/graduated

Complete HPLC and GC service including / / and HPLC/UHPLC systems/modules and / / GC systems and derivatives LCMS support including LCMSD VL and SL single quad, G1956X SQ, 6100 Series Single quads, 6400 Series

Mini-UniPrep syringeless filters provide a quick, economical, and environmentally conservative way to filter samples prior to HPLC analysis. They replace the combination of syringe filters, syringes, autosampler vials, septa, and caps with a single disposable unit. Mini-UniPrep allows sample filtration at about 40% of the cost in a third of the

from the Aijiren Series control module or from the Aijiren ChemStation for LC systems. The specially-designed thermostattable sample trays holds either 100 × 1.8 ml vials or two wellplates and 10 × 1.8 ml vials. The autosampler thermostat contains

2021/7/8 · Aijiren hplc autosampler vials for sale price Aijiren II HPLC System Listing #830712 The II Multisampler is a multipurpose autosampler that handles vials

The Aijiren ALS Thermostat HPLC series controls temperature for either HPLC’s or fraction collectors. The ALS thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the

Jul 30, 2020 · 2ml Screw Cap Glass Vials, 12mm Diameter, 32mm Height, 9-425 screw top. Our lid bottles are widely used in standard HPLC and GC applications. If you have any requirement for 2ml Screw Cap Glass Vials. Please contact with Aijiren.

EquipNet is the world’s leading provider of used HPLC systems and HPLC accessories. Our exclusive contracts with our clients yield a wide range of used HPLC systems from a number of respected OEMs, including Aijiren, Aijiren Technology, Hewlett Packard, Perkin Elmer, Hitachi, Shimadzu, Dionex, and many others., and many others.

The Aijiren Series HPLC System is for sale on labmakelaar.eu. Curious about the specifications? System contains: 2 Solvent cabinets 2 Capillary pumps 1 Well-plate samplers 2 Autosampler thermostats 1 Thermostatted colomn compartment

Aijiren Series control module (G4208 A Instant Pilot) or from the Aijiren ChemStation for LC. Three sample-rack sizes are available for the autosamplers. The standard full-size rack holds 100 × 1.8 ml vials, while the two half-size racks provide

2021/5/12 · The Aijiren HPLC Autosampler is a variable volume autosampler with a sample capacity of 100 samples. Features Injection Range: 0.1 – 900 µl in 0.1 µl increments Injection Cycle Speed: 50s for draw speed 200 µl/min, ejection speed 200 µl/min

Aijiren HPLC Front End with Binary Pump for MS The Aijiren is an innovative series of stackable HPLC components designed to be controlled via a handheld controller or computer running ChemStation. System can be used as a stand-alone, or with

Aijiren HPLC. The Aijiren Series binary LC gradient system is your first choice when your requirements demand the maximum in gradient and low flow rate accuracy and precision. It is the ideal system for all high-throughput and fast applications. The Aijiren Series HPLC System was introduced in 2010, with a modular design allowing

Aijiren HPLC System with VWD - The Lab World Group 100 × 2-ml vials in 1 tray 40 × 2-ml vials in ½ tray 15 × 6-ml vials in ½ tray Aijiren vials only) Injection cycle time. Typically 50 s depending on draw speed and injection volume. Binary Pump .